KB16977: What is SmartHeap and how does it work with the MicroStrategy Intelligence Server?

The Strategy Intelligence Server and Intelligence Server Universal use a memory management component called SmartHeap designed by a software company named Microquill (http://www.microquill.com/). This component is designed to maximize memory allocation performance especially in a multi-threaded and multi-processor environment.
 
SmartHeap works by replacing the normal C++ runtime and Operating System memory allocation system with its own code designed to enhance the same functionality. Since its code is linked with the Strategy Intelligence Server and Intelligence Server Universal, it affects only the Intelligence Server process. Other processes on the machine are not affected. SmartHeap manages the allocation of memory from the operating system and passes it along to the application as needed.
 
SmartHeap improves performance by performing the following actions:
 

• Since memory allocation operations against the Operating System take a longer time to complete, SmartHeap typically allocates a larger chunk of memory than the application requests and caches the extra memory in its own data structures which it uses to satisfy later requests from the Strategy Intelligence Server and Intelligence Server Universal process.
   
• Similarly when memory is freed by the application, SmartHeap will return the memory back to its cache rather than free it back to the operating system.
   
• Even though SmartHeap may reserve larger amounts of memory than needed as detailed in step (a) it will not actually commit the memory until that memory is actually used so no overall higher penalty is incurred by adopting this strategy.
   
• SmartHeap then divides the large chunks of memory allocated by the system into smaller "pages". These pages are used to store blocks of memory sorted by the size of the allocation. The memory allocations are divided into small, medium, big and large blocks.
   
  
• The small block allocator deals with memory as an array of fixed size blocks. An array is present in memory for every possible size (e.g. 1 byte block, 2 byte block etc). This is is very fast for allocation and deallocation operations.
   
• All allocators - small, medium and big use a data structure based on pools to service memory requests. A series of memory pools is created each holding variable sized memory blocks. SmartHeap determines the best pool to use based on the request, though sometimes the request size may be smaller than the block chosen. However the pool based architecture is very quick especially for multi-threaded applications like the Strategy Intelligence Server and Intelligence Server Universal 9.x running on multi-processor systems since multiple threads can access different pools at the same time.
   
• The large block allocator is the simplest and forwards memory requests directly to the operating system in a serialized manner. Since this is a slower operation, Strategy Intelligence Servers that run with a heavy memory allocation profile may see some performance decrease. However this will provide a smaller process memory size, and memory freed by the action is released directly to the operating system without being cached.
• The diagram below shows how SmartHeap works for the Strategy Intelligence Server Universal. The Free region is the memory allocated in bulk by SmartHeap which is then subdivided into pages for each block allocation size and then into pools. Large blocks are allocated directly from the Operating system.
  

• SmartHeap defaults to following thresholds (in bytes) when determining which allocator is to be used to satisfy a memory request in Strategy:
   
  

  Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None
  Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None
  Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None
  Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None
  Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None
  Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None	Linux / UNIX: MSTREMService  9999 YesLog EntryDescriptionSourceSource task from which the memory request originated. Each of the governed components may have multiple sources requesting memory.HandleInternal unique reference that MCM uses to track the memory request.SizeMemory size requested by the source.Contracted TotalAmount of memory that MCM is in the process of contracting out.Available TotalMemory that is available for the current MCM request. Before MCM rejects the first request, this counter reflects the value equal to the (High Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). If the MCM has already reached request idle mode, the value for this counter would be (Low Water Mark - 1.05 * Intelligence Server Private Bytes - Contracted Total). In both these cases if the calculated value of the Available total is a negative number, the counter is reset to 0.I-Server Private Bytes (PB)See belowI-Server Virtual Bytes (VB)See belowSystem User Address Space (UAS)See belowSystem AvailableAvailable memory on the machine - on Windows machines this is calculated as (Total Commit Limit - Total Committed Pages)System TotalTotal amount of memory on the machine - On Windows machines this is the Total Commit Limit counter.Largest Free and its bottomThe size of the largest free contiguous block of address space and the address of the start of this block. The Intelligence Server keeps track of allocations and will periodically walk through its entire memory space to update these counters.Single Alloc LimitSee belowMemory ReserveSee belowVirtual Byte Limit (percent)When the Strategy Intelligence Server Virtual Byte counter reaches this percentage of the User Address Space, MCM will begin to deny memory requests.High Water MarkSee belowLow Water Mark95 percent of High Water MarkCreate a dataset "Generic Metrics List" containing the list of Metrics names that you want to select.  The main dataset (here "Revenue & Discount by Category, Country, Month") contains 2 metrics Discount and Revenue. The goal is to select which Metric you want to display.On the dataset "Generic Metrics List" create a derived metric named "Metric Selector" On the dataset "Revenue & Discount by Category, Country, Month" create a new derived metric "KPI" defined as follows Case([Metric Selector]="Rebates", Discount, [Metric Selector]="Sales", Revenue, 0) Add the "Generic Metric" attribute in the filter panelYou can now select one Metric or the other, or both to dynamically change the content of your dashboard.Operating SystemSmallMediumBigLargeWindow 32-bit <= 16KB< 512KB>= 512KBSolaris <= 65376< 32MB>= 32MBLinux <= 65376< 32MB>= 32MBAIX <= 65376< ULONG_MAX (defined in limits.h)NoneHP-UX <= 65376< ULONG_MAX (defined in limits.h)None

  
  

  
The SmartHeap API also exposes a number of other tuning options. However to determine the optimal value for these settings in a production environment is not possible. Strategy runs performance tests while varying some of these parameters to determine a best case default value for these. Unless specifically recommended Strategy does not encourage changing the default values of the exposed settings without extensive testing, and before making these changes in a production environment.
 
Strategy Technical Support cannot determine whether there is any impact of changing these variables as this is a customization of the product behavior. Users requiring such analysis should contact Strategy Professional Services for assistance.