KB442611: Architecture, Workflow, and System Requirements for HyperIntelligence for Web

Product Manager, Senior • Strategy

This article is targeted towards MicroStrategy Administrators who need to understand the underlying architecture and system requirements of Microstrategy HyperIntelligence for Web.

The architecture for HyperIntelligence for Web is similar to Strategy Library. Strategy Library is a client application running on a desktop browser or a mobile device, whereas HyperIntelligence for Web is available as a Chrome and Microsoft Edge browser extension.

Single-Node Architecture Diagram

The Chrome and Edge extension uses HTTPS to request data from the Library REST Server.
The Library REST Server interacts with the Intelligence Server using a custom TCP protocol.

The Library REST Server needs to be accessible to the user’s browser.
The Intelligence Server should be behind the DMZ (Demilitarized Zone) and inaccessible to the user’s browser.

There is no need to scale as a single node can handle hundreds of user requests.

The user logs into the Intelligence Server (via the Library REST Server) using the authentication mode of your choice (see below for a list of supported modes).
Access Control Lists can be created in Workstation to administer what cards are available to different users.
Security filters are applied by the Intelligence Server to restrict access to data in the warehouse.

Multi-Node Architecture Diagram

Like the single-node architecture, the same Library REST Server and Intelligence Server are utilized.

You can configure the authentication mode used.

HTTPS is utilized for secure communications.
ACLs and Security Filters are enforced.

However, in a multi-node deployment, a load balancer to distribute users to different instances is used.

Each instance is running its own Library REST Server.
"Sticky sessions” must be enabled on the load balancer to ensure the session state is correctly maintained.

With this form of horizontal scaling, you can increase the number of instances to handle the incoming user load.

User-Flow Diagram

HyperIntelligence for Web Requirements

This section lists the requirements that must be fulfilled by the target system in order to successfully install and run the HyperIntelligence extension.

Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher

Strategy Workstation Requirements

This section lists the requirements for Strategy Workstation that must be fulfilled by the target system in order to successfully install Workstation.

Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher

Troubleshooting

Workstation and the Browser client use the Library REST Server for communicating with the rest of the Strategy Platform. The logs are available at a default location for the Library/REST Server:
Windows:

C:\Program Files (x86) \Common Files\MicroStrategy\Log\StrategyLibrary-StrategyLibrary.log

Linux:

<HOME_PATH>/log/StrategyLibrary-StrategyLibrary.log

For more information on HyperIntelligence for Web, see the HyperIntelligence Documentation.

Comment

0 comments

Details

Knowledge Article

Published:

January 22, 2019

Last Updated:

June 23, 2020

HyperIntelligence for Web Requirements

This section lists the requirements that must be fulfilled by the target system in order to successfully install and run the HyperIntelligence extension.

Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher

Strategy Workstation Requirements

This section lists the requirements for Strategy Workstation that must be fulfilled by the target system in order to successfully install Workstation.

Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher
Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher	Google Map in VIGoogle MapApple MapGoogle Map in RSDGoogle MapApple MapESRI Map in VIESRI MapApple MapESRI Map in RSDESRI MapApple Map in 10.1 (showing Grid in 10 and lower)TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user wakes up and decides to trigger a manual or custom time window data load at 5am, 1 hour before the next scheduled data load.Because this is a manual or custom time window data load, the 'Last data load start time' is not affected.6amAt 6am, the scheduled data load kicks off, not affected by the manual or custom time window data load.The 'Last data load start time' is 12am, the frequency is 6 hours, so the data load is triggered as desired.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amAn administrative user shuts down the intelligence server for maintenance.The data load schedule is not stopped.6amThe Intelligence Server is still shut down. At 6am, the scheduled data load kicks off, but fails.Because the data load kicked off, the 'Last data load start time' is set to 6am, the frequency is 6 hours, so the next data load will occur at noon. If the Intelligence Server is up and running at noon, the data load will migrate data over the entire time period since the last successful data load finish time.TimeEventDetails12amA scheduled data load occurs at 12am as desired.The 'Last data load start time' is set to 12am.5amThe data load schedule is stopped by an Administrator for system maintenance. 6amAt 6am, nothing happens.The data load schedule is still stopped.9amMaintenance finishes and the data load schedule is started again. 9am and 1 secondThe data load schedule process checks, and finds that the 'Last data load start time' plus 'frequency' is less than the current time, so the data load kicks off immediately.The data load kicks off immediately, setting the 'last data load start time' to 9am.Prompt Answer MethodRequirementsPrompts in the Target Are Answered By...Answer with the same promptSame prompt in the target and sourceThe prompt answer from the sourcePrompt userNoneThe user (prompts are displayed when the target is executed)Default answerNoneThe default prompt answer for the target promptDynamicallyAttribute element prompt in targetThe object selected in the source (for example, the attribute element that the user clicked on)Empty answerTarget prompt must not be requiredNothing (no prompt answer is provided from the source and the user is not prompted)Static element listAttribute element prompt in targetThis prompt overrides the prompt ansnwers from the source with a list of elements. Selecting this option makes the Element List area available to select the elements to be passed as answers to the element list prompt in the target.Current unitHierarchy prompt in targetSimilar to the Dynamic prompt answer method, where the prompt is answered using the object selected in the source.All valid unitsHierarchy prompt in targetAny object to the left of or above the user selection in the source is used as the prompt answer for the target. In other words, this method passes all the selections made on the source, rather than just the selection made for the link.ORDER_FACTOrder_IDOrder_DateShip_DateBUSINESS_DAYSBusiness_DayDAYS_TO_SHIPOrder_IDDays_to_shipSupported Platforms Latest macOS (macOS 10.14: Mojave (Liberty)) and Windows OS (Windows 10) preferred. Supported Browsers Google Chrome and Microsoft Edge. Note: Use the latest version of each browser for the best experience. Strategy Authoring Tool for Cards Strategy Workstation 2019 and above.Authentication Modes SupportedGuest, Standard, LDAP, Trusted, SAML, Kerberos, and Badge.Supported Cubes OLAP Intelligent cube, in-memory MTDI cube, or an in-memory MDX/SAP cube CORS Settings CORS Settings must be enabled. Please see How to enable CORS Settings? Supported PlatformsMac and WindowsProcessors (CPUs)64-bit (minimum), 64-bit multicore (recommended) Memory RAM 4 GB or higher Disk Space 8GB or higher

Troubleshooting

C:\Program Files (x86) \Common Files\MicroStrategy\Log\StrategyLibrary-StrategyLibrary.log

Linux

<HOME_PATH>/log/StrategyLibrary-StrategyLibrary.log

HyperIntelligence Documentation.